全自动焊接设备与其他焊接设备相比，该自动焊接设备具有更高的自动化程度，其所有部件均选自高质量的原始设备，并且操作非常简单方便。

Compared with other welding equipment, the automatic welding equipment has a higher degree of automation. All its components are selected from high-quality original equipment, and the operation is very simple and convenient.

使用全自动焊接设备的注意事项：

Precautions for using automatic welding equipment:

1.焊枪电缆不要压得太紧，弯曲角度也不能太小。送丝软管的半径不应小于150mm，否则内部电缆会损坏，可能导致事故。焊接期间请勿更改电压调试开关。

1. The welding gun cable should not be pressed too tightly and the bending angle should not be too small. The radius of the wire feeding hose shall not be less than 150 mm, otherwise the internal cable will be damaged, which may cause accidents. Do not change the voltage commissioning switch during welding.

2.在焊接操作过程中，请勿触摸带电部件，例如焊接机的输出接口。

2. During the welding operation, do not touch the live parts, such as the output interface of the welding machine.

3.更改或调试面板旋钮时，请勿过分用力。自动不锈钢管焊接机可能会损坏设备。

3. Do not use excessive force when changing or adjusting the panel knob. Automatic stainless steel pipe welding machine may damage the equipment.

4.每次焊接之前，请检查焊接机的连接是否正确以及接地线是否可靠。

4. Before each welding, please check whether the welding machine is connected correctly and whether the grounding wire is reliable.

全自动焊接设备工作速度较快，深度较大，不易变形。可以同时进行多束加工和多工位加工，使焊件更加准确。但是，全自动焊接机的安装不是那么简单。山东数控焊接设备厂家提醒您，在安装之前，要有一个良好的安装环境，并且要执行相应的保护。更多相关内容就来我们网站http://www.tayfsk.com咨询吧！

Full-automatic welding equipment is fast, deep and not easy to deform. Multi-beam processing and multi-station processing can be carried out at the same time to make the weldment more accurate. However, the installation of automatic welding machine is not so simple. Shandong CNC welding equipment manufacturer reminds you that before installation, there should be a good installation environment and corresponding safety protection should be implemented. Come to our website for more relevant content http://www.tayfsk.com Ask!