自动焊接专机是用于自动化生产的，要求人工或者机械手上下工件，焊接工装夹具自动将工件固定，定位，自动启动焊接电源的电弧，自动送丝和焊枪或工件的自动移动，焊接完成后自动退回，人工或机械手取下工件，其组成主要由焊接系统、机械系统、电气控制系统构成。那么山东焊接专机如何保养呢？

The special automatic welding machine is used for automatic production. It requires manual or manipulator to mount and lower the workpiece. The welding fixture automatically fixes and positions the workpiece, automatically starts the arc of the Welding power supply, automatically feeds wire and automatically moves the welding gun or workpiece, automatically returns after welding, and manually or manually removes the workpiece. It is mainly composed of welding system, mechanical system, and electrical control system. So how to maintain the Shandong welding machine?

1.自动焊接专机操作机中链条为易损件，每年少拆下检查一次，及时处理。

1. The chain in the automatic welding machine operator is a vulnerable component, which should be removed and inspected at least once a year for timely handling.

2.各行程开关的动作灵活性、可靠性要经常检查，以免有松动、损坏。

2. The flexibility and reliability of each travel switch should be regularly checked to avoid looseness and damage.

3.电路接头要经常检查，保持连接牢固，插接可靠。

3. Circuit connectors should be regularly inspected to ensure they are securely connected and reliably plugged in.

4.工作站控制器及手操器内的尘土要三个月一次用压缩空气吹 。

4. The dust inside the workstation controller and manual operator should be blown with compressed air every three months.

5.电器、旋钮、开关要经常检查，保持清洁和良好的接触，以免误动作。

5. Electrical appliances, knobs, and switches should be regularly inspected to maintain cleanliness and good contact to avoid misoperation.

6.各导轨、滑架、丝杠及螺母等运动部位经常检查清理，防止尘土堆积而影响运动部位的灵活运动。

6. Regularly inspect and clean the moving parts such as guide rails, sliding frames, screws, and nuts to prevent dust accumulation from affecting the flexible movement of the moving parts.

7.各滑动导轨的结合面不允许碰撞、磨损。丝杠、齿条等关键运动部件要经常检查避免磨损情况。

7. The joint surface of each sliding guide rail is not allowed to collide or wear. Key moving components such as screws and racks should be regularly inspected to avoid wear and tear.

8.自动焊接操作机各运动部位、导轨与滚轮应涂润滑脂，闭式传动部位应注润滑油，以保持部件运动灵活；是对平心轮、偏心轮部件的维护，保证其紧固，确保横臂运动平直。

8. Each moving part, guide rail, and roller of the automatic welding operator should be coated with lubricating grease, and the closed transmission part should be injected with lubricating oil to maintain flexible movement of the components; The key is to maintain the flat center wheel and eccentric wheel components, ensuring their fastening and ensuring the smooth movement of the cross arm.

自动焊接专机的日常保养八大事项相关内容就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.tayfsk.com进行咨询吧！

That's all for the daily maintenance of the automatic welding machine. We hope it can be helpful to you. For more information, please come to our website http://www.tayfsk.com Let's consult!