In the process of using a lot of equipment, it is inevitable that there will be some failures like this or that. In the face of such a situation, when purchasing the equipment, we should see how the manufacturers promise in terms of after-sales service. If the commitment in the after-sales service is very good, you can find the manufacturer to repair the product directly within the warranty period, which can guarantee the effect of maintenance. How to choose the suitable straight seam automatic welding equipment, the following Shandong CNC welding equipment for you to introduce:

1、选用直缝自动焊接设备的可行性分析，考虑焊接件是否标准，焊接厚度是否达到焊接要求，焊接量大小等。

1. The feasibility analysis of the selection of straight seam automatic welding equipment, considering whether the weldment is standard, whether the welding thickness meets the welding requirements, welding quantity and so on.

2、专用性较强的或是较通用一些的焊接设备，如果用户长期只焊接一种焊接件，可以考虑考虑专用焊接设备，如果需要兼顾其它焊接件，可以考虑通用性较强的自动焊接设备。

2. For the welding equipment with strong specificity or more general use, if the user only welds one kind of welding piece for a long time, the special welding equipment can be considered. If other welding pieces need to be considered, the automatic welding equipment with strong universality can be considered.

3、坚持“适用的才是好的”原则，一条直缝焊，如果长期使用一台6轴机械手去焊接，就有点大材小用。

3. Adhere to the principle of "applicable is good", a straight seam welding, if a long-term use of a 6-axis manipulator to weld, it is a bit overqualified.

4、对焊接工艺不了解的，可以通过试焊来检验焊接效果、焊接效率。

4. If you don't know the welding process, you can test the welding effect and efficiency by trial welding.

5、对于，用户可以货比三家，对于焊接同一个产品，如设备相差太大，可能通过对比机械配置、厂家实力、售后条款、焊接效率等方面去权衡。山东数控切割机在使用的时候，谁也没有办法能够保证，这些设备在使用时不会出现一点点的问题。

5. For the price, users can compare three products. For welding the same product, if the price difference of equipment is too large, it may be weighed by comparing the mechanical configuration, manufacturer strength, after-sales terms, welding efficiency and other aspects. Shandong CNC cutting machine in use, no one can guarantee that these devices in use will not appear a little bit of problem.

而如果过了质保期以后，要看出现的是什么问题，任何产品都会有一个产品使用说明书，在产品使用的时候，*会发现一些简单的故障，在产品说明书当中都有进行专门的介绍，可以直接来进行维修。

If the warranty period is over, it depends on what problems appear. Any product will have a product manual. When the product is used, * some simple faults will be found. There is a special introduction in the product manual, which can be repaired directly.

而如果说山东数控焊接设备出现的问题相对比较严重，没有办法能够做出准确判断的话，尽量还是找厂家的工作人员来维修。虽然找厂家需要支付***的上门服务费，但是它的维修上能够得到保护。

If the problem of Shandong CNC welding equipment is relatively serious, there is no way to make an accurate judgment, try to find the factory staff to repair. Although we need to pay the door-to-door service fee of the manufacturer, its maintenance can be protected.

如果选择的是一些其他的维修人员，对产品的了解不是特别的透彻，很容易造成设备的二次损坏，这样的维修效果肯定是厂家不愿意接受的

If some other maintenance personnel are selected, they do not have a thorough understanding of the product, and it is easy to cause secondary damage to the equipment. The manufacturer is certainly not willing to accept such maintenance effect