The price of automatic welding machine with quality and quantity guarantee is not cheap. In order to ensure its long-term stable work and improve the quality of welding parts, the welding equipment should be maintained orderly in daily life. If possible, special maintenance personnel can be set up to check the automatic welding regularly The working condition of the pick-up equipment, such as whether there is too much noise, whether there is obvious vibration in the working process, or whether the quality of the workpiece has declined.

1、定期做好检测工作在实施自动焊 接机设备的内部或外部等接头端子检查时，必须把入力电源开关关闭后才可施行。比如查看自动焊 接机设备的通电情况时，看冷却风扇的旋转是否平顺，在运行过程中是否有异常的振动、声音和气味发生，气体是否有漏泄，电焊线的接头及绝缘的包扎是否有松懈或剥落，焊 接的电缆线及各接线部位是否有异常的发热现象等。

1. The inspection work should be done regularly. When inspecting the internal or external terminals of the automatic welding machine, the power switch must be turned off before the inspection can be carried out. For example, when checking the power on of automatic welding machine equipment, check whether the cooling fan rotates smoothly, whether there is abnormal vibration, sound and smell in the process of operation, whether there is gas leakage, whether the joints of welding wire and insulation are loose or peeled off, whether there is abnormal heating phenomenon in the welding cable and various wiring parts, etc.

2、接触是否良好由于自动焊 接机设备强迫风冷，很容易从周围吸入尘埃并积存于机内。如果使用频次较高则建议通过一些除尘设备的辅助将内部的尘土吸净保证内部的清洁，尤其在变压器或者各级线圈遭受污染之后可能出现接触不好，而在擦拭时也要特别注意间隙部分缓慢擦拭，并定期检查主力配线部位以及接线端子，并且看螺丝是否有松动情况，如果遇到生锈情况则要将锈去除后保证导电的良好。

2. Whether the contact is good or not, due to the forced air cooling of automatic welding machine equipment, it is easy to inhale dust from around and accumulate in the machine. If the frequency of use is high, it is recommended to absorb the internal dust with the assistance of some dust removal equipment to ensure the internal cleanliness, especially after the transformer or coils at all levels are polluted, the poor contact may occur. When wiping, special attention should be paid to the slow wiping of the gap part, and the main wiring parts and terminals should be checked regularly to see if the screws are loose, In case of rust, remove the rust to ensure good conductivity.

3、定期换损耗件正规自动焊 接机设备长期的使用也难免会使外壳因碰接而变形，生锈而受损伤，内部零件也会消磨，因此在年度的保养和检查时要实施不 好品零件的更换和外壳修补及绝缘劣化部位的补强等综合修补工作，不好品零件的更换在做保养时应全部一次更换新品，以确保自动焊 接机设备的性能长期稳定。

3. Regular replacement of wear and tear parts, regular automatic welding machine equipment, long-term use will inevitably make the shell due to contact deformation, rust and damage, internal parts will also wear away, so in the annual maintenance and inspection to implement improper maintenance In order to ensure the long-term stability of the performance of the automatic welding machine, the replacement of good parts, the repair of the shell and the reinforcement of the insulation deterioration parts, and the replacement of bad parts should be replaced with new products at one time.

随着自动焊 接机设备的使用范围越来越广，此种高科技设备技术等更新，促使焊 接机的使用越来越普遍，甚有许多焊 接机设备根据行业的特点开发出了一些特制型焊 接产品，从此角度来说正是因为焊 接机设备优良的工作表现才引得各厂家不断更新和改进。

With the use of automatic welding machine equipment more and more widely, this kind of high-tech equipment technology update, promote the use of welding machine more and more common, and even many welding machine equipment according to the characteristics of the industry developed some special welding products, from this point of view, it is because of the excellent performance of welding machine equipment that the manufacturers constantly update and improve.