好的设备必须好的保养，还请朋友们在采用中多多的留意对其的保养，只有这种才可以延长寿命，为高质量的焊接奠定基础。下面山东自动焊接设备厂家为您讲讲自动焊接设备的操作以及维护内容。

Good equipment must be well maintained. Please pay more attention to its maintenance when using it. Only this can prolong its life and lay a foundation for high-quality welding. Next, Shandong automatic welding equipment manufacturer will tell you about the safe operation and maintenance of automatic welding equipment.

自动焊接设备的操作

Safe operation of automatic welding equipment

1.工作前仔细检查工具，设备是不是完整，焊机接地是不是靠谱地接地，焊机的修理应由电器保养人员做好，别的人员不能拆修。

1. Before work, carefully check whether the tools and equipment are complete, and whether the welding machine is grounded reliably. The repair of the welding machine should be done by the electrical maintenance personnel, and other personnel should not dismantle and repair it.

2.工作前要仔细的检查工作环境，确定为正常方可开始工作，工作前配戴好劳动防护用品。

2. Before work, carefully check the working environment and ensure that it is normal and safe before starting work. Wear labor protection articles before work.

3.高空焊接时要佩戴带，带记挂时，一定要避开焊接部位和地线部位，以防焊接时把带烫断。

3. The safety belt shall be worn when welding at heights. When the safety belt is hung, the welding part and ground wire must be avoided to prevent the safety belt from burning off during welding.

4.接地线要牢靠，禁止用脚手架、钢丝缆绳、机床等作接地线。通常标准是焊接点的就近点，带电设备放置地线一定要当心，不能把设备导线和地线连接，以防烧毁设备或发生火灾。

4. The grounding wire shall be secure and safe. Scaffolds, wire ropes, machine tools, etc. are not allowed to be used as grounding wires. Generally, the standard is the nearest point of the welding point. Be careful when placing the ground wire of the live equipment. Do not connect the equipment wire with the ground wire to avoid burning the equipment or causing a fire.

自动焊接机如何维修保养

How to repair and maintain the automatic welding machine

1.再开始开机前行设备查验，包含外型检查和內部查验。外部便是看是否有损坏或零件问题，如果有及时检修解决，內部查验包含电机、电路、控制装置等的检测。

1. Before starting the machine again, carry out equipment inspection, including appearance inspection and internal inspection. The external inspection is to check whether there is any damage or part problem. If it is timely repaired and solved, the internal inspection includes the detection of motor, circuit, control device, etc.

2.企业须具备合格的车间、机器、设备，如仓库、热处理设备、焊接设备和测试设备等。让专门的人员做好使用解决。

2. The enterprise must have qualified workshops, machines and equipment, such as warehouses, heat treatment equipment, welding equipment and testing equipment. Let special personnel do a good job of using and solving.

3.当焊接导热系数较高的金属如铜、铝及其合金时，应挑选热输入强度大、具备较高焊透能力的焊接方法，以便被焊金属在短的时长内做到熔化状态，并使工件变形小。

3. When welding metals with high thermal conductivity, such as copper, aluminum and their alloys, the welding method with high heat input strength and high penetration capacity shall be selected, so that the metal to be welded can be melted in a short time and the workpiece deformation is small.

此外在接拆电焊机电源线或电焊机发生故障时，应会同电工一起做好修理，严防触电事故，为重。更多相关内容就来我们网站http://www.tayfsk.com咨询吧！

In addition, when connecting or removing the power line of the electric welding machine or the electric welding machine fails, repair it together with the electrician to prevent electric shock accidents. Safety is the most important. More relevant content will come to our website http://www.tayfsk.com Consult!