焊接专机的结构组成由焊接电源、焊接机头、焊件移动或变为装置、辅助装置（送丝装置、焊机回收输送装置、拖链、支架、电气控制等）。通过结构可以了解到山东焊接专机的注意事项：

The structure of the special welding machine is composed of welding power supply, welding head, weldment moving or transforming device, auxiliary device (wire feeding device, welding machine recycling and conveying device, drag chain, support, electrical control, etc.). Through the structure, we can understand the precautions of Shandong welding machine:

自动焊操作机为了保证焊接精度，焊接平台需要定期清理，避免粘上油污等。

In order to ensure the welding accuracy of the automatic welding operator, the welding platform needs to be cleaned regularly to avoid sticking oil stains.

设备要保证平稳，调整好位置避免精度受到影响。

The equipment shall be stable and the position shall be adjusted to avoid the impact of accuracy.

在设备运行的同时要注意观察焊接情况，防止发生焊接意外。操作工不可以闲谈，玩手机等干于工作无关的事。

Pay attention to observe the welding condition while the equipment is running to prevent welding accidents. Operators are not allowed to chat, play mobile phones and other things unrelated to work.

操作工要穿戴防护用品，焊接温度以及电气故障带电情况会对人身造成一定威胁。

Operators shall wear protective equipment. Welding temperature and electrical fault electrification may pose a certain threat to personal health.

送丝装置或者送料装置出现故障要及时停止，断电检查其工作情况。

The wire feeding device or feeding device shall be stopped in time in case of failure, and the power shall be cut off to check its working condition.

自动焊接专机周围要避免杂物，防止电源或电线受损发生意外。

Avoid sundries around the automatic welding machine to prevent accidents caused by damage to the power supply or wires.

在通电情况下不可以自行打开数控控制箱及各种线路，防止触电。

It is not allowed to open the NC control box and various lines by itself when the power is on to prevent electric shock.

离开岗位前和下班前要关闭电源和气源，防止他人随意操作。

Turn off the power supply and gas source before leaving the post and after work to prevent others from operating at will.

遇到焊接问题，及时上报领导联系厂家，做出方案才可调整。

In case of welding problems, timely report to the leader to contact the manufacturer and make a plan before adjustment.

对焊接专机故障的检查和维修排除，要按照相关要求做好记录。方便以后类似故障发生后的检查、日常维护保养和故障排除的经验积累，也为以后更新、添置时作为合格供应方产品的业绩档案和选择产品和生产单位的依据。更多相关内容就来我们网站http://www.tayfsk.com咨询！

The inspection, repair and troubleshooting of special welding machine shall be recorded according to relevant requirements. It is convenient to accumulate the experience of inspection, routine maintenance and troubleshooting after the occurrence of similar faults in the future, and also serves as the basis for the performance archives of qualified suppliers' products and the selection of products and production units when they are updated and added in the future. Come to our website for more relevant content http://www.tayfsk.com consulting service