Today, with more and more applications of robots, almost all industries are considering using robots to replace human resources, including the welding industry. Robot welding is composed of robot body, control cabinet, teaching programmer and other main parts, but the robot also needs to be equipped with welding power supply, wire feeding device and welding gun device. Now with this article, let's understand the precautions of welding robot.

山东焊接专机

Shandong welding machine

当人们使用焊接机器人时，应该注意什么吗?例如，选择机器人焊接的安装位置。机器人焊接包含许多高精度部件，尤其是它的控制柜。虽然防尘效果很好，但是安装现场的恶劣环境会降低机器人的使用寿命。

When people use welding robot, what should they pay attention to? For example, choose the installation position of robot welding. Robot welding includes many high precision parts, especially its control cabinet. Although the dust-proof effect is very good, the harsh environment of the installation site will reduce the service life of the robot.

所谓，为了避免环境因素对机器人焊接的不利影响，延长其使用寿命，尽量将机器人焊接安装在防水、干燥、灰尘少的地方。控制柜和焊机要求尽可能与地面保持距离。

In order to avoid the adverse effect of environmental factors on robot welding and extend its service life, the robot welding should be installed in the place with waterproof, dry and less dust. The control cabinet and welding machine shall be kept away from the ground as far as possible.

一般来说，机器人焊接在出厂前已经校准了其原点位置，但即使如此，在安装机器人时，仍有必要测量位置并检查工具位置。这一步相对简单，只需在机器人焊接的设置中找到菜单，然后按照提示一步一步来。

Generally speaking, the robot welding has calibrated its origin position before leaving the factory, but even so, it is still necessary to measure the position and check the tool position when installing the robot. This step is relatively simple, just find the menu in the robot welding settings, and then follow the prompts step by step.

机器人焊接安装完成后，其防护措施是必要的。用机器人本身代替人力的目的是为了快速地做一些重复性的动作，但是如果有人在运动过程中靠近，就有可能造成重大的事故。

After the welding and installation of robot, its safety protection measures are necessary. The purpose of using robot instead of human is to do some repetitive actions quickly, but if someone is close in the process of movement, it may cause major safety accidents.

因此，尽量在机器人焊接安装外安装围栏，防止无关人员靠近;操作机器人焊接时，工作人员还应佩戴防护用品;启动按钮设置在机器人的位置，以避免留下隐患。

Therefore, the fence should be installed outside the welding installation of the robot as far as possible to prevent irrelevant personnel from approaching; when operating the robot welding, the staff should also wear protective equipment; the start button should be set in the safe position of the robot to avoid leaving safety hazards.

以上就是焊接机器人的使用事项了，不知道大家看完上文之后有没有对此有更深入的了解了呢?随着近几年机器人的兴起，提升了整体的工作量，而且焊接精度更高，如果您想了解更多的话，可以多多关注我们。

The above is the use of welding robot, I don't know if you have a deeper understanding after reading the above? With the rise of robots in recent years, the overall workload has been improved, and the welding accuracy is higher. If you want to know more, you can pay more attention to us.