所谓预防性维修,就是要注意把有可能造成设备故障和出了故障后难以解决的因素排除在故障发生之前,尽量减少或延缓数控设备的故障。下面山东数控焊接设备厂家来讲讲数控焊接设备的日常三大检查使用。

The so-called preventive maintenance is to eliminate the factors that may cause equipment failure and are difficult to solve after the failure before the failure occurs, so as to reduce or delay the failure of NC equipment as much as possible. Next, Shandong CNC welding equipment manufacturer will talk about the daily three major inspections of CNC welding equipment.

1.正确使用设备

1. Use the equipment correctly

数控设备的正确使用是减少设备故障、延长使用寿命的关键,它在预防性维修中占有很重要的地位。据统计,有三分之一的故障是人为造成的,且-般性维护(如注油、清洗、检查等)是由操作者进行的,解决的方法是:强调设备管理、使用和维护意识,加强业务、技术培训,提高操作人员素质,使他们尽快掌握数控机床的性能,严格执行设备操作规程和维护保养规程,保证设备运行在合理的工作状态之中。

The correct use of NC equipment is the key to reduce equipment failures and extend service life, and it plays an important role in preventive maintenance. According to statistics, one-third of the failures are caused by human beings, and general maintenance (such as oil injection, cleaning, inspection, etc.) is carried out by operators. The solution is to emphasize the awareness of equipment management, use and maintenance, strengthen business and technical training, improve the quality of operators, so that they can master the performance of CNC machine tools as soon as possible, strictly implement the equipment operation procedures and maintenance procedures, and ensure that the equipment operates in a reasonable working state.

2.操作者日常检查

2. Daily inspection of operators

操作者是数控设备的直接用户,为了保证数控设备的正常运行,要求数控操作者每天应该执行以下各项:检查所有的防护板、壳和门操作是否适当、在整个行程中步进每一个轴,观察运行是否平滑、确保所有轴的限位开关正常工作并调整到相应的限位位置、检查导轨是否有划伤或过度磨损的迹象、检查导轨清洁器没有被损坏、触摸导轨检查润滑是否适当。

The operator is the direct user of the CNC equipment. To ensure the normal operation of the CNC equipment, the CNC operator is required to perform the following items every day: check whether all protective plates, shells and doors are properly operated, step each axis in the whole stroke, observe whether the operation is smooth, ensure that the limit switches of all axes work normally and adjust to the corresponding limit positions, check whether the guide rails are scratched or excessively worn Check that the guide rail cleaner is not damaged. Touch the guide rail to check whether the lubrication is proper.

3.巡回检查设备

3. Patrol inspection equipment

根据数控设备的性、复杂性和智能化高的特点,使得它的维护、保养工作比普通设备复杂且要求搞的多。维修人员应通过经常性的巡回检查,如CNC系统的排风扇运行情况,机柜、电机是否发热,是否有异常声音或有异味,压励表指示是否正常,各管路及接头有无泄漏、润滑状况是否良好等,

According to the progressiveness, complex and intelligent characteristics of CNC equipment, its maintenance is more complex and requires more than ordinary equipment. The maintenance personnel shall conduct regular patrol inspection, such as the operation of the exhaust fan of the CNC system, whether the cabinet and motor are hot, whether there is abnormal sound or smell, whether the indication of the piezometer is normal, whether there is leakage in all pipelines and joints, and whether the lubrication is good,

积极做好故障和事故预防,若发现异常应及时解决,这样做才有可能把故障消灭在萌牙状态之中,从而可以减少可避免的损失。

Actively prevent failures and accidents, and timely solve any abnormalities found, so as to eliminate the failure in the embryonic state and reduce avoidable losses.

数控焊接设备的日常三大检查使用相关内容就到这里了，您对此有什么相关的咨询或者相关的需求，就来我们网站http://www.tayfsk.com进行留言联系吧！

This is the end of the daily three major inspections of CNC welding equipment. If you have any related inquiries or needs, please come to our website http://www.tayfsk.com Leave a message to contact!