1、焊接温度以及电气故障带电情况会对造成一些威胁。操作工要穿戴防护用品。

1. Welding temperature and electrical fault electrification can pose some threats. Operators should wear protective equipment.

2、防止发生焊接意外。操作工不可以闲谈，设备运行的同时要注意观察焊接情况。

2. To prevent welding accidents. Operators are not allowed to chat casually, and attention should be paid to observing the welding situation while the equipment is running.

3、防止他人随意操作。离开岗位前和下班前要关闭电源和气源。

3. Prevent others from operating at will. Turn off the power and gas sources before leaving the job and before leaving work.

4、防止电源或电线受损发生意外.自动焊接专机周围要避免杂物。

4. Prevent accidents caused by damage to the power supply or wires. Avoid debris around the automatic welding machine.

5、防止触电通电情况下不可以自行打开数控控制箱及各种线路。

5. To prevent electric shock and power on, it is not allowed to open the CNC control box and various circuits by oneself.

6、及时上报联系山东焊接专机厂家，遇到焊接问题。做出方案才可调整。

6. Timely report and contact the Shandong welding machine manufacturer if encountering welding problems. Only by making a plan can adjustments be made.

7、调整好位置防止精度受到影响，设备要确定平稳。

7. Adjust the position to prevent accuracy from being affected, and ensure that the equipment is stable.

8、断电检查其工作情况。送丝装置或者送料装置出现故障要及时停止。

8. Power off and check its working condition. If the wire feeding device or material feeding device malfunctions, it should be stopped in a timely manner.

9、焊接平台需要定期清理，为了确定焊接精度。防止粘上油污等。

9. The welding platform needs to be cleaned regularly to determine the welding accuracy. Prevent sticking oil stains, etc.

自动焊接专机的注意事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.tayfsk.com咨询吧！

That's all we need to know about the precautions for the automatic welding machine. We hope you can be helpful. For more information, please visit our website http://www.tayfsk.com Consult!