在使用山东自动焊接设备的时候，总会出现一些故障，为了解决这一难题，一般要根据具体情况加以解决处理。下面来讲讲自动焊接设备焊接钢件抗压强度不足的解决。

When Shandong automatic welding equipment is used, there will always be some failures. In order to solve this problem, it is generally necessary to solve it according to the specific situation. Now let's talk about how to solve the problem of insufficient compressive strength of steel parts welded by automatic welding equipment.

(1)检查水平的压力是否过小，检查水平条是否能够固定。

(1) Check whether the horizontal pressure is too small and whether the horizontal bar can be fixed.

(2)检查焊接能量是否太小，焊接钢是否生锈，焊点是否差。

(2) Check whether the welding energy is too small, whether the welding steel is rusty, and whether the welding spot is poor.

(3)检查电头和电梯杆、电梯杆和电梯臂之间是否有过剩的化合物。

(3) Check whether there is any excess compound between the electric head and the elevator pole, elevator pole and elevator arm.

(4)检查电气级头的断面是否因破损而增加，减少焊接能量。

(4) Check whether the section of the electrical connector is increased due to damage to reduce welding energy.

(5)检查电级和铜软联和融合面可否焦虑不安空气氧化。

(5) Check whether the electrical level, copper soft joint and fusion surface can be oxidized by anxious air.

如果出现点焊强度不足问题，那么需要检查电极压力是否过小，焊接工件的外观是否存在腐蚀或铁锈现象，检查电极头与电极棒、电极棒与电极臂是否有过多的氧化物。

If the spot welding strength is insufficient, it is necessary to check whether the electrode pressure is too low, whether the appearance of the welding workpiece is corroded or rusted, and whether the electrode head and electrode rod, electrode rod and electrode arm have too much oxide.

提醒您，在平时做好对设备的保养维护工作，避免问题的出现。以上就是详细为您介绍问题具体的内容，以供大家参考运用。关注我们http://www.tayfsk.com，了解更多！

Remind you to do a good job of equipment maintenance at ordinary times to avoid problems. The above is a detailed introduction to the specific content of the problem for your reference. Follow us http://www.tayfsk.com , learn more!