想要保证焊接机器人的工作质量，离不开技术人员对设备的应用方法以及对设备的保养，毕竟一个劣质的设备，生产出的产品质量也是无法保证的。那么使用焊接机器人保证其质量要做到什么？山东焊接专机厂家为您讲解。

To ensure the working quality of the welding robot, it is necessary for technicians to apply the equipment and maintain the equipment. After all, a low-quality equipment can not guarantee the quality of the products produced. What should be done to ensure the quality of welding robots? Shandong welding machine manufacturer will explain to you.

一、焊接机器人检查和维护

1、 Inspection and maintenance of welding robot

1、送丝机构。包括送丝力是否正常，送丝管是否受损，是否有异常报警。

1. Wire feed mechanism. Including whether the wire feeding force is normal, whether the wire feeding tube is damaged, and whether there is abnormal alarm.

2、检查气流是否正常。

2. Check whether the air flow is normal.

3、割炬保护系统是否正常。等等。

3. Whether the cutting torch protection system is normal. wait.

二、周检查和维护

2、 Weekly inspection and maintenance

1、擦洗焊接机器人的轴。

1. Scrub the shaft of the welding robot.

2、检查TCP的准确性。

2. Check the accuracy of TCP.

3、检查残留物的油位。

3. Check the oil level of the residue.

4、检查机器人各轴的零位是否准确。等等。

4. Check whether the zero position of each axis of the robot is accurate. wait.

三、焊接机器人每月检查和维护

3、 Monthly inspection and maintenance of welding robot

1、润滑机器人的轴。其中，16轴为白色，带润滑油。

1. Lubricate the axis of the robot. Among them, shafts 1 to 6 are white with lubricating oil.

2、带黄油的RTS导轨的RP定位器和红色喷嘴。

2. RP positioner and red nozzle for RTS rail with grease.

3、RP定位器上的蓝色润滑脂和灰色导电油脂。等等。

3. Blue grease and grey conductive grease on the RP positioner. wait.

8.除1-8的工作外，完成每周检查的所有项目。

8. In addition to the work in 1-8, complete all items checked every week.

9、设备故障时，应立即维修，报告维修情况，详细说明故障前设备的状况和运行情况，并协助维修人员进行检查，顺利恢复生产。主管将对设备保养情况进行不定期抽查。操作者在每班交接时仔细检查设备状况是否完好，记录好各班设备运行情况。

9. In case of equipment failure, it is required to repair immediately, report the repair situation, specify the condition and operation of the equipment before the failure, and assist the maintenance personnel in inspection to successfully resume production. The supervisor will conduct random inspection on equipment maintenance. The operator shall carefully check whether the equipment is in good condition during each shift handover, and record the equipment operation of each shift.

设备故障时，维修部门应当及时反映设备状况，包括故障时间、故障现象和故障前后情况，经营者应当向维修人员详细说明，以纠正和快速排除故障。更多有关设备的事项，就来关注我们网站http://www.tayfsk.com！

In case of equipment failure, the maintenance department shall timely reflect the condition of the equipment, including the failure time, failure phenomenon and the situation before and after the failure. The operator shall explain in detail to the maintenance personnel to correct and quickly eliminate the failure. For more information about equipment, please follow our website http://www.tayfsk.com ！