随着现代化的发展，自动焊接技术得到了更好的应用，在使用数控焊接设备时也要小心注意，以防造成人身伤害。接下来咱们就讲讲山东数控焊接设备在操作中需要注意的问题。

With the development of modernization, automatic welding technology has been better applied. When using numerical control welding equipment, care should be taken to prevent personal injury. Next, we will talk about the problems that need attention in the operation of Shandong CNC welding equipment.

(1)为确保机械设备不发生事故，不仅机械设备本身应该满足要求，更重要的是要求操作人员严格遵守操作规程。当然，机械设备的操作规则因其类型而异，但它们的基本规则是相同的。

(1) In order to ensure that the mechanical equipment does not have accidents, not only the mechanical equipment itself should meet the safety requirements, but also the operators should strictly abide by the safety operation procedures. Of course, the safety operation rules of mechanical equipment vary according to their types, but their basic safety rules are the same.

(2)应该正确穿戴个人防护设备和用具。要求穿的一定要穿，不能穿的一定不要穿。例如，当操作旋转加工时，妇女被要求戴帽子。如果她们不戴帽子，头发可能会被卷起来。同时，要求不要戴手套。因为如果它们被磨损，机器的旋转部分可能会拧入手套并伤害手。

(2) Personal protective equipment and appliances should be properly worn. What you are required to wear must be worn, and what you cannot wear must not be worn. For example, when operating rotary processing, women are required to wear hats. If they don't wear hats, their hair may curl up. At the same time, it is required not to wear gloves. Because if they are worn, the rotating part of the machine may screw into the gloves and hurt hands.

(3)作业前，应对机械设备进行检查，并应空车运转一下。只有确认正常后才能投入运行。

(3) Before operation, the mechanical equipment shall be inspected for safety and shall be operated without load. It can be put into operation only after it is confirmed to be normal.

(4)严禁操作有故障的机械设备。为了防止事故，禁止勉强应付。

(4) It is strictly forbidden to operate mechanical equipment with faults. In order to prevent accidents, forced coping is prohibited.

(5)机械设备的装置应该按规定正确使用，不允许折叠使用。

(5) The safety devices of mechanical equipment shall be used correctly according to regulations, and folding is not allowed.

(6)机械设备中使用的支柱、夹具和加工件应该安装牢固，不得松动。

(6) The props, clamps and machined parts used in mechanical equipment shall be firmly installed without looseness.

(7)机械设备运行时，禁止手动调节，不得用手测量零件，也不得光滑、清洁杂物等。如有必要，关闭机械设备。

(7) When the mechanical equipment is running, it is prohibited to adjust it manually, measure the parts by hand, or smooth or clean sundries. If necessary, first turn off the mechanical equipment.

(8)机械设备运行时，操作人员不得擅离岗位，以防出现问题，无人处理。

(8) During the operation of mechanical equipment, operators shall not leave their posts without permission to prevent problems from being handled by nobody.

(9)工作结束后，切断电源，将车刀和工件撤出工作位置，整理好工作场地，摆放好零件和夹具，清理好机械设备的卫生。

(9) After the work is completed, cut off the power supply, remove the turning tool and workpiece from the working position, tidy up the work site, place the parts and fixtures, and clean up the sanitation of mechanical equipment.

以上就是数控焊接设备应用时需要注意的一些问题，关注好这些问题，不仅可以提高工作效率，而且在一定程度上可以保证人身，是对企业负责更是对自己负责。更多相关内容就来我们网站http://www.tayfsk.com进行咨询！

The above are some problems that should be paid attention to in the application of numerical control welding equipment. Paying attention to these problems can not only improve work efficiency, but also ensure personal safety to a certain extent. It is responsible for the enterprise as well as for itself. More relevant content will come to our website http://www.tayfsk.com Consult!