随着焊接自动化和智能化水平的不断发展，越来越多的企业使用数控焊接设备来代替传统焊机，在生产线中可以提高焊接效率，稳定产品质量，数控焊接设备属于机械设备，在使用中会出现老化磨损的情况，为了避免因为设备因素导致焊接质量问题，维护保养是重要一步。

With the continuous development of welding automation and intelligent level, more and more enterprises use numerical control welding equipment to replace traditional welding machines, which can improve the welding efficiency and stabilize the product quality in the production line. Numerical control welding equipment is a mechanical equipment, which will appear aging and wear in use. In order to avoid welding quality problems caused by equipment factors, maintenance is an important step.

1、日检查维护保养：在山东数控焊接设备工作结束之后，需要进行日常检查维护，检查送丝机构、气体流量、保护系统、水循环系统、焊枪TCP点是否正常，并做好点检记录，发现问题及时修正。

1. Daily inspection and maintenance: after the work of Shandong CNC welding equipment is completed, daily inspection and maintenance shall be carried out to check whether the wire feeding mechanism, gas flow, safety protection system, water circulation system and welding gun TCP point are normal, and the spot check record shall be made, and the problems found shall be corrected in time.

2、周检查维护保养进行六清理：清理数控焊接设备各轴以及本体；清理焊机水箱过滤网；清理压缩空气进出口的过滤网；清理送丝机构；清理焊枪内的杂质，预防出现焊接缺陷。

2. Weekly inspection and maintenance shall be carried out in six ways: cleaning all shafts and bodies of CNC welding equipment; Clean the filter screen of the welding machine water tank; Clean the filter screen at the inlet and outlet of compressed air; Clean the wire feeding mechanism; Clean the impurities in the welding gun to prevent welding defects.

3、月检查维护保养：对各轴涂抹润滑油，清理控制柜以及焊机，检查焊机水箱的水位，及时补充冷却液，检查数控焊接设备的配件，及时更换。

3. Monthly inspection and maintenance: apply lubricating oil to each shaft, clean the control cabinet and welding machine, check the water level of the welding machine water tank, replenish the coolant in time, check the accessories of the numerical control welding equipment, and replace them in time.

数控焊接设备维护保养注意以下几点：

Pay attention to the following points in the maintenance of numerical control welding equipment:

1、使用润滑油注意：在数控焊接设备本体的注油孔不能加普通黄油，会导致各轴不能灵活转动，需要加白色的润滑油。

1. Note for using lubricating oil: ordinary grease cannot be added to the oil filling hole of the NC welding equipment body, which will cause the shaft to be unable to rotate flexibly, and white lubricating oil needs to be added.

2、电缆线保护：数控焊接设备在工作过程中会对电缆线进行移动和拖拽，电缆线不能进行踩踏、挤压，在进行拖拽的时候注意避免电缆线缠绕。

2. Cable protection: CNC welding equipment will move and drag the cable during operation. The cable cannot be trampled or squeezed. Pay attention to avoid cable winding during dragging.

3、焊枪保护：在对焊枪进行维护保养的时候，主要注意两方面，一方面检查导电嘴是否需要更换，另一方面清理送丝软管，防止杂质堆积影响正产焊接。

3. Welding torch protection: When maintaining the welding torch, pay attention to two aspects: on the one hand, check whether the electric nozzle needs to be replaced, and on the other hand, clean the wire feeding hose to prevent the accumulation of impurities from affecting the production welding.

4、选用质量好的焊丝：数控焊接设备采用的是桶装焊丝，这样在焊接过程不需要频繁更换焊丝影响焊接效率，质量好的焊丝可以保证焊接质量的稳定性，预防送丝不均等现象。

4. Select welding wire with good quality: barreled welding wire is used in the numerical control welding equipment, so it is not necessary to change the welding wire frequently during the welding process to affect the welding efficiency. The welding wire with good quality can ensure the stability of the welding quality and prevent uneven wire feeding.

5、选择气体保护焊：混合气体保护焊讲求混合气配比准确、混合均匀，二氧化碳气体需要保证纯净。

5. Select gas shielded welding: mixed gas shielded welding requires accurate mixture ratio and uniform mixing, and carbon dioxide gas needs to be pure.

以上就是数控焊接设备的维护保养注意事项，维护保养适当的数控焊接设备可以提高焊接产品的稳定性，有利于延长使用寿命，为企业提升生产效益。更多相关内容就来我们网站http://www.tayfsk.com咨询吧！

The above are the precautions for the maintenance of CNC welding equipment. Proper maintenance of CNC welding equipment can improve the stability of welding products, extend the service life and improve the production efficiency for enterprises. Come to our website for more relevant content http://www.tayfsk.com Ask!