Experience sharing of pipe automatic welding processing:

1.如果送丝不稳定，应立即停止，待处理后继续焊接;

1. If the wire feeding is unstable, stop immediately and continue welding after treatment;

2.仰焊时，应将焊枪的电缆拉直，及时处理焊枪的扭曲;

2. During overhead welding, straighten the cable of the welding gun and deal with the distortion of the welding gun in time;

3.加强焊工责任教育，发现问题立即停止焊接，并及时处理。如果不确定，就需要咨询有经验的人;

3. Strengthen the responsibility education of welders, stop welding immediately if problems are found and deal with them in time. If you are not sure, you need to consult an experienced person;

4.确保接地线接触良好;

4. Ensure good contact of grounding wire;

5.焊接防风棚，采取防风措施;

5. Welding windproof shed and taking windproof measures;

6.确保发电机网络电压在正常范围内;

6. Ensure that the generator network voltage is within the normal range;

7.不要堵塞焊机的风管;

7. Do not block the air duct of the welding machine;

8.随时检查保护气路和煤气表是否漏气;

8. Check whether the protective gas circuit and gas meter leak at any time;

9.每天焊接后，务必清理焊接小车和送丝机上的飞溅物、铁屑和灰尘;

9. After welding every day, be sure to clean the spatter, scrap iron and dust on the welding trolley and wire feeder;

10.每个防风棚应尽可能配备一台空气压缩机，以清理焊接设备和防风棚内的铁屑和灰尘，为焊工提供良好的工作环境;

10. Each windproof shed shall be equipped with an air compressor as far as possible to clean the iron filings and dust in the welding equipment and windproof shed and provide a good working environment for welders;

11.在转移到下一个焊接接头之前，一定要切断焊机电源，然后才能移动;

11. Before transferring to the next welding joint, the power supply of the welding machine must be cut off before moving;

12.未经培训的焊工不得工作;

12. Untrained welders shall not work;

13.严禁非正式人员打开机壳进行焊接设备维修。

13. It is strictly forbidden for informal personnel to open the casing for welding equipment maintenance.

本文的精彩内容由山东数控焊接设备为您提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.tayfsk.com我们有专门的客服为您解答问题

The wonderful content of this article is provided by Shandong CNC welding equipment. There are many wonderful contents on this website. You can click to enter more contents: http://www.tayfsk.com We have special customer service to answer your questions