为了让焊接变位机发挥它更好的作用，大家在平时的使用中要做好日常维护保养工作，以免因设备的损坏影响后续的应用，带来一系列麻烦。接下来山东数控焊接设备厂家就为大家介绍下焊接变位机送丝装置的保养方法。

In order to make the welding positioner play a better role, we should do a good job in daily maintenance, so as not to affect the subsequent application due to equipment damage and bring a series of troubles. Next, Shandong CNC welding equipment manufacturer will introduce the maintenance method of wire feeder of welding positioner.

(1)加压力调整。送丝辊轮加压力要根据所用的焊丝直径适当地调节。如果压力不足，焊丝将打滑;压力过大，焊丝将被刻伤、变形。

(1) Pressure adjustment. The wire feeding roller pressure shall be adjusted appropriately according to the diameter of the welding wire used. If the pressure is insufficient, the welding wire will slip; If the pressure is too high, the welding wire will be scratched and deformed.

(2)焊丝矫直装置的调整。焊丝矫直装置的调整方法按机种的不同而异，要根据焊接变位机厂家的标示调整到相应焊丝直径的适合位置。

(2) Adjustment of welding wire straightening device. The adjustment method of the welding wire straightening device varies according to different models, and it shall be adjusted to the appropriate position of the corresponding welding wire diameter according to the marks of the welding positioner manufacturer.

(3)焊丝盘的安装。若安装不到位，焊丝盘在旋转中就有掉下来的危险，产生严重后果，要好好检查制动块或插销是否可靠地装上。

(3) Installation of welding wire reel. If the installation is not in place, the welding wire disc may fall down during rotation, which may cause serious consequences. Check whether the brake block or latch is reliably installed.

(4)送丝轮及所用的焊丝直径。一定要装上适合于所用焊丝直径的送丝轮，并检查滚轮上所刻的数字是否与所用焊丝直径一致。

(4) Wire feed wheel and diameter of welding wire used. Be sure to install a wire feeding wheel suitable for the diameter of the welding wire used, and check whether the number engraved on the roller is consistent with the diameter of the welding wire used.

(5)送丝滚轮沟槽的磨耗污损。检查送丝滚轮的沟槽是否磨耗，沟槽表面是否刻伤，沟槽中是否粘附着尘埃、铁粉、焊丝镀屑等。清理时要用棉纱抹布等揩净。

(5) Wear and dirt of wire feeding roller groove. Check whether the groove of wire feeding roller is worn, whether the groove surface is scratched, and whether dust, iron powder, welding wire plating scraps, etc. are stuck in the groove. Wipe with cotton gauze rag when cleaning.

(6)导丝嘴的检查。装设于送丝滚轮前后的导丝嘴磨损或与送丝滚轮不水平，就会引起焊丝弯曲，送丝不稳定，因此，一定要定期检查和维修。

(6) Inspection of wire guide nozzle. If the wire guide nozzle installed at the front and back of the wire feeding roller is worn or not level with the wire feeding roller, the welding wire will be bent and the wire feeding will be unstable. Therefore, regular inspection and maintenance must be carried out.

所以提醒您要定期做好检测工作。比如查看焊机通电时，冷却风扇之旋转是否平顺，是否有异常的振动，声音和气味发生，气体是否有漏泄等。更多相关内容就来我们网站http://www.tayfsk.com咨询！

Therefore, I remind you to do a good job of testing regularly. For example, check whether the cooling fan rotates smoothly, whether there is abnormal vibration, sound and smell, and whether there is gas leakage when the welding machine is powered on. More relevant content will come to our website http://www.tayfsk.com consulting service